RM-EAS102-Intelligent Wireless Alarm System-Intelligent Wireless Alarm Set(For P2P Cameras)
RM-EAS102-Intelligent Wireless Alarm System-Intelligent Wireless Alarm Set(For P2P Cameras)

RM-EAS102-Intelligent Wireless Alarm Set(For P2P Cameras)-Intelligent Wireless Alarm System

Set Content


Specifications RM-102 RM-87 RM-80 RM-66 RM-83 RM-85
Product Type Alarm with sound and flash
Featured Function Linkage IP Camera
Power Supply 100~240VAC 50/60Hz
Working Current Standby current: <40mA Alarm current: <400mA
Alarm Volume > 95db
Wireless Frequency 433M / 868M optional, default 433M
Arm Type Arm with sound、arm without sound
Arm Delay 15s
Alarm Signal Output (NO/NC、impulse signal)is optional; Normal Mode: NO,NC
Output NO/NC control, max 60s in max load
Wireless Learning Max 20pcs wireless sensors
GSM Brand 3/4 brands optional
  • GSM Smart linkage alarm Siren (RM-102)
  • Features:
  • ☉ Available for all IP cameras, which have alarm signal input to start video recording function;
  • ☉ GSM SMS program setting , 3 groups alarm numbers , SMS alarm;
  • ☉ SMS/Remote arm/disarm operation, matching with wireless detectors, easy to use;
  • ☉ After the system is triggered , send alarm SMS to alarm numbers , at the same time , on-site sound and flash alarm, linkage IP Camera recording function.
  • ☉ Preload max 20 wireless detectors ;
  • ☉ Type of alarm signal: NO/NC, or pulse signal optional ;
  • ☉ Can output control signal to control electrical equipment;
  • Rechargeable Wireless Smart Door/Window Sensor (RM-87)
  • Features:
  • ☉ Monitors open/closed status of the doors and windows.
  • ☉ Generally set as Perimeter zone.
  • ☉ Sends signal to the alarm host if any door or window is opened.
  • ☉ High capacity Li-ion rechargeable battery included.
  • ☉ With panic button function also.
  • ☉ Low Power Light flashes frequently in blue
  • Specifications:
  • ☉ Power supply: 3.7V/200mAh rechargeable Li-ion battery.
  • ☉ Emission distance: ≥ 150 meters (in open air).
  • ☉ Charging time: 12 h.
  • ☉ Full loaded battery work time: ≤3 years.
  • ☉ Alarm distance: < 4cm.
  • ☉ Dimension: 65 * 30 * 17 mm.
  • Rechargeable Wireless PIR Sensor (RM-80)
  • Features:
  • ☉ Artistic design;
  • ☉ Microcomputer intelligent control, anti-electromagnetic interference, anti white light inference;
  • ☉ Tamper alarm (Send signal to alarm host and activate alarm);
  • ☉ High capacity rechargeable Li-ion battery, long service life, with USB charging port;
  • ☉ Mainly monitor and control indoor stereoscopic spaces, generally set as Motion Zone.
  • Specifications:
  • ☉ Power supply: 3.7V/800mAh rechargeable Li-ion battery.
  • ☉ Static current: ≤ 60 uA.
  • ☉ Alarm current: ≤ 13 mA.
  • ☉ Full loaded battery work time: ≤2 years.
  • ☉ Detecting range: 110° 10m×10m.
  • ☉ Emission distance: ≥ 150 meters (in open air).
  • ☉ Charging time: ≥ 8 h
  • ☉ Product dimension: 108 * 59 * 38 mm
  • Light indicates:
  • Alarm activated: flashes 3 times consecutively and send alarm signal to the host.
  • Tamper activated:flashes 3 times consecutively and send alarm signal to the host.
  • Low power:flashes 3 times consecutively and send alarm signal to the host when alarm activated, then flashed 10 times consecutively after 6 seconds and send low power signal to the host upon the first flash.
  • Note:Using the USB power charger to charge it when with low power. The charging time should not shorter than 8 hours continuously.
  • Wireless controller (RM-66)
  • Features:
  • ☉ Used to armed & disarmed alarm host.
  • ☉ Emergency button for emergency or panic help
  • Specifications:
  • ☉ Operating power: 27A 12V alkaline battery
  • ☉ Wireless Transmitting distance: ≥300ft (in open area).
  • ☉ Service life: ≤2 years.
  • Wireless Smoke Detector (RM-83)
  • Features:
  • ☉ Smart design, beautiful artist and easy installing.
  • ☉ Intellectual single chip process and steady and credible self-testing.
  • ☉ photo-sonic alarming and restore automatically.
  • ☉ Connection pole design, convenience, fastness and shortcut.
  • ☉ suited to use it solely or fit on the wireless electro put module to use with the wireless control system.
  • Specifications:
  • ☉ Power: 9V battery.
  • ☉ Static Current: < 20 uA.
  • ☉ Alarm Current: < 25mA.
  • ☉ Alarm output: photo-sonic alarm.
  • ☉ Alarm volume: ≥95db.
  • ☉ Operated temperature: -10 to 45℃.
  • ☉ Operated humidity:< 97%
  • ☉ Size: R=5.25(cm), H=3.2(cm)
  • Wireless Household Gas Detector (RM-85)
  • Features:
  • ☉ Be sensitive to gas/natural gas/liquid oil gas.
  • ☉ Safety design, signal-chip intelligent process and temperature compensation automatically. Low false alarm and reliable selfinspection.
  • ☉ Alarming with sound and flash and restoring automatically.
  • ☉ Available to work alone or work as an accessory of an alarm system.
  • Specifications:
  • ☉ Operating power: 230VAC +/-10%.
  • ☉ Alarming density: gas: 0.1% ~ 0.3%, natural gas: 0.1% ~0.5%.
  • ☉ liquid oil gas: 0.0% ~ 0.3%.
  • ☉ Operating temperature: -10 to 45℃
  • ☉ Operating humidity:≤97%.
  • ☉ Alarm volume:≥95db.
  • ☉ Respond time:≤20s
  • ☉ Renew time:≤20s
  • ☉ Size :11.5×7×4(cm)
  • ☉ Material: ABSV0

You might also be interested in